SEASON ADJUST Setup
SEASON ADJUST enables you to conveniently decrease or increase the ZONE TIME (run
time) currently set for each of the programs. The adjustment can be made in 10% increments
from 0% (OFF) to 200% of the normal (100%) run time.
SEASON ADJUST is a universal setting which will affect all three (A, B and C)
programs.
Step 1 – Place the function dial to the SEASON ADJUST
Step 2 – Press
reduction of station run time and 200% will double the station run time.
Step 3 – Return the function dial to
MANUAL STATION Operation
MANUAL STATION operation enables you to activate any station and give a temporary run
time duration. Only one station can be activated by the MANUAL STATION operation. Any
run time adjustment made in MANUAL STATION is temporary and will not affect the actual
run times in the programs.
Step 1 – Place the function dial to the MANUAL STATION
Step 2 – Press
Step 3 – Press
Step 4 – Press
Step 5 – Turn the function dial slowly to the
station will be activated until the set run time expires, then the controller will revert
to normal operation.
or
to adjust to the desired adjustment percentage; i.e., 90% equals 10%
RUN
to activate MANUAL STATION operation.
or
to select the Station number being activated.
or
to adjust the desired run time duration.
position.
when finished.
position.
RUN
position to activate. The selected