Battery Life; Winter Hibernation; Replacing The Battery - Worx Landroid M Manual Del Usuario

Robot cortacésped
Ocultar thumbs Ver también para Landroid M:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58

6.3 Battery life

The heart of the Landroid
No maintenance is required. For proper storage of the battery,
make sure it is fully charged in kept in a cool dry place between
(20°C-60°C).
The life-span of the Landroid
factors, such as:
The time span of the mowing season in your region.
Amount of hours the Landroid
Battery maintenance during storage.
®
Landroid
M can be charged manually without the
boundary wire.(See Fig. N)
To manually charge the battery without connecting the
boundary wire to the charging base;
1. Connect the Charging Base to a suitable power supply.
2. Manually dock the Landroid
3. The charging base red light will turn on.
4. Within 3 seconds and before the charging base light turns green, press the Landroid
OFF button.
®
5. Landroid
M will begin to charge.

6.4 Winter hibernation

®
Your Landroid
M will live longer and healthier if it is allowed to hibernate. So even though it is tough, we would recommend
that you store your Landroid
Before you prepare your Landroid
Thoroughly clean your Landroid
14
Fully charge the battery
Turn the power off
To maximize the battery life, it is recommended to fully charge the battery before storage during winter.
The Boundary Wire can be left in the ground although its ends should be protected, such as placed in a tin can with grease.
If the Charging Base is left outside for winter, leave the Boundary Wire connected.
NOTE: Before storing for winter, you can take your Landroid
functions will be tested and worn parts will be replaced.
When bringing the Landroid
are clean, it is recommended to use a fine grade emery cloth to clean. Then make sure the date and time are correct and
®
send the Landroid

6.5 Replacing the battery

WARNING: Press the ON/OFF Key to OFF before attempting any adjustment, replacement or repair.
If you need to replace the Battery, follow these steps:
1.
Gently turn your Landroid
2.
Remove the four screws on the battery cover (See Fig. O).
3.
Take out the old battery (See Fig. P).
4.
Put in the new battery.
5.
Firmly replace the 4 screws.
Lawn Mowing Robot
®
M is its 28-volt lithium-ion battery.
®
M's battery depends on various
®
M mows per day.
®
M into the Charging Base while the Landroid
®
M in your shed or garage during the winter.
®
M for winter hibernation, we recommend you:
®
M
®
M back to work after winter hibernation, make sure the Charging Strips (5) and Contact Pins (3)
M back to what it loves doing: mowing.
®
M upside down.
1
N
®
M to a dealer for a thorough cleaning and tune-up, where its
®
M is powered off.
®
M power ON/
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido