Turning The Engine Off; Performance; Maintenance Regular Operations - Garland Best 430 A Manual De Instrucciones

TURNING THE ENGINE OFF

a) Release the accelerator.
b) Move the engine switch to the off position.(STOP)

PERFORMANCE

a) Put the harness on.
b) Hook the harness to the brushcutter ring.
c) Move the accelerator to the desired work
position.
Nylon release
With the engine on and with the head spinning, press it
against the ground so the thread releases itself.

MAINTENANCE REGULAR OPERATIONS

Sure of which the machine is stopped and fries before coming to the works of
maintenance. These pieces should be provided by an authorized Garland
supplier. For the correct maintenance it is necessary to make the following
verifications:
Air filter
a) Verify that the air filter is not dirty.
b) If the filter is dirty, please clean it.
c) Check that the accelerator works correctly.
2
36
1