Nuisance Delete - Tait TM8100 Guia Del Usuario

Nuisance delete

If you wish to temporarily delete a channel from a scanning or
voting group, you can use the function key programmed for
nuisance delete.
To remove a channel from a group:
1 Wait until the radio has stopped on the channel that you
want to remove from the group.
2 Press the function key programmed for nuisance delete.
Alternatively, the function key programmed for voting or
scanning may be programmed so that a long press activates
nuisance delete.
The channel remains removed from the group until you
either select another group, or the radio is turned off and
then on again.
Priority channels cannot be removed from a scan group using
the nuisance delete function.
30 Basic operation