The following options are available with the individual sensors/contacts
Floor sensor:
Mode 1
Mode 2
RT sensor:
no options,
Presence detector: Temperature selection
Window contact:
no options,
no options, floor temperature control,
floor temperature is shown on screen
Floor temperature control, floor temperature level
can be set between 20 °C and 30 °C, room temperature
is shown on display; floor sensor (907 0 321)
internal temperature sensor is switched off, external
temperature sensor (IP 65) (907 0 459)
this temperature is controlled when the HVAC
output on the presence detector is switched on.
If no presence is detected, the set program is used.
as long as the window contact is switched on, the
thermostat controls at frost protection temperature;
window contact is displayed on screen.
GB
29