Sony SU-WL31 Instrucciones página 6

After proper installation of the TV,
secure the cables properly.
If people or objects get tangled in the cables, this may
result in injury or damage to the TV.
Do not allow the AC power cord or
the connecting cable to be pinched.
If the AC power cord or the
connecting cable is pinched
between the unit and the wall
or is bent or twisted by force,
the internal conductors may
become exposed and cause a
short circuit or an electrical
break. This may cause a fire or
an electric shock.
Be careful not to hurt your hands or
fingers during the installation.
Be careful not to hurt your hands or fingers when
installing the Wall-Mount Bracket or the TV.
The screws needed to secure the
Wall-Mount Bracket to the wall are
not supplied.
Use the appropriate screws for the wall material and
structure when mounting the Wall-Mount Bracket.
6
(GB)
Before installation
If your TV is supplied with a leaflet explaining
how to install Wall-Mount Bracket ("Installing the
Wall-Mount Bracket"), be sure to refer to the leaflet
before installation.
Step 1:
Checking the parts
required for the
installation
1
Prepare five or more M6 or
equivalent screws (not supplied)
and a screwdriver. Select screws
suitable for the material of the
wall.
2
Unpack the carton and check to
see that all the following items
are included.
Mounting Hook Unit (2)
Plate Unit (1)
Screw (+PSW5 × L16) (4)
Screw (+B5 × L12) (2)