Sony SU-WL31 Instrucciones página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
Step 4:
Installing the Plate Unit
on the wall
1
Temporarily secure the Plate
Unit to the wall using a screw.
Align the Plate Unit to make it
level with the floor.
WARNING
• The screw used in this procedure is not supplied.
• Select a screw suitable for the material and the
structure of the wall.
Align the unit so that it is
exactly level.
Plate Unit
Hole used for
temporarily attaching the
Plate Unit
2
Secure the Plate Unit to the wall
using four or more M6 or
equivalent screws (not
supplied).
1 Tighten the screws firmly so that the Plate
Unit can support the weight of the display.
2 Tighten the screw used in procedure 1.
WARNING
The wall that the TV will be installed on should be
capable of supporting a weight of at least four times
that of the TV (page 16). Make sure of the strength of
the wall the TV will be installed on. Reinforce the wall
sufficiently, if necessary.
2
1
9
(GB)

Publicidad

Tabla de contenido
loading

Tabla de contenido