To Avoid Breakage - Samsung NX58H9500W Serie Manual De Instalación

Ocultar thumbs Ver también para NX58H9500W Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation requirements

To avoid breakage

CAUTION: Please DO NOT push the
unit strongly when you install. These
actions can cause the damage to the
unit.
18 English
Please DO NOT grasp the knob and
push when you install.
(Grasp the L/R door area to push the
unit.)
CAUTION
Do NOT lift or handle the unit by the cooktop frame.
1. The counter top around the cut-out should be flat and leveled (see hatched
area on Fig. 1).
2. Before installing the unit, measure the heights of the two cabinet sides
(C1 ~ C4), front and back (See Fig. 1) from the floor to the top of the counter.
3. Level the range using the four leveling legs so that the height from the floor
to the underside of the cooktop frame is greater than the tallest cabinet
measurement by at least 1/16".
4. Slide the unit into the cabinet (DO NOT PUSH THE UNIT HARD). Make sure the
center of the unit aligns with the center of the cabinet cut-out.
C2
C1
C4
C3
Fig. 1

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Nx58h9950w serieNx58k9500w serie

Tabla de contenido