Washing And Drying The Filters - Dyson 360 Eye Manual Del Usuario

Washing and drying the filters

Pre-motor filter
Wash the pre-motor filter at least every month according
to the instructions below to maintain performance.
1
Press the cyclone release button and
remove the cyclone unit.
Pull out the pre-motor filter.
24
2
Wash the filter with cold water only.
Do not use hot water or detergents.
Shake the filter to remove debris and
excess water.
Repeat the wash/shake cycle until the
water runs clear.
3
Allow to completely dry naturally
(24 hours minimum).
To refit, re-assemble in reverse order.
24
hrs