Operation Instruction - M Confort E1200 Manual De Usuario

MCONFORT E1200
V. OPERATION INSTRUCTION
1. Pull the unit out of the cardboard box and place it on a stable horizontal surface.
2. Check if all the accessories listed are complete.
3. Place the unit on a solid horizontal heat resistant surface.
4. Pull the water tank out about 10 cm. and add water (fig. 2). Use the locking pin
when closing the tank to fix its posi on.
NOTE: The water level must be between the MIN and MAX line (fig. 3). When we
use the equipment, dirt and dust from the filters accumulates in the tank, so it is
recommended to clean the tank and change the water frequently.
5. Only use the unit with the correct electrical outlet.
6. Connect the unit to power and turn on the power switch on the rear of the unit.
A small beep will be heard and the power indicator will light.
NOTE: Make sure the plug is securely connected to the outlet. Do not remove the
plug from the outlet with a wet hand.
7. Press the "COOL" bu on to put the equipment to work in evapora ve cooler
mode, which will lower the ambient temperature and improve the humidity
condi ons, purity of the air.
13