Troubleshooting - M Confort E1200 Manual De Usuario

MCONFORT E1200
X. TROUBLESHOOTING
If the unit is not working properly, you can refer to the following list before sending it in for
repair.
PROBLEMS
The unit does
not work.
The air is not
being filtered
properly.
A en on:
1-. If the problem cannot be found in the list or if it persists, contact our technical service.
2-. DO NOT open or repair the unit yourself.
This seal indicates that this product should not be disposed of together with other
household waste in the EU. In order to prevent environmental damage or health problems
due to poor disposal, recycle it responsibly. To return your used equipment, contact
whoever sold the equipment. They can take care of him responsibly.
POSSIBLE REASONS
1-. The plug is not properly
connected.
2-. The "l" bu on on the power
switch is not pressed.
3-. The "ON / OFF" bu on is not
pressed.
1-. The filter screen is clogged with
dust and dirt, which affects the
performance of the unit.
2-. The ven la on hole is clogged.
SOLUTIONS
1-. Insert the plug into the outlet
and make sure it is properly
connected.
2-. Press the "l" bu on on the
power switch.
3-. Press the "ON / OFF" bu on
a er plugging in the unit.
1-. Clean the filter screen.
2-. Remove foreign objects from
the ven la on hole.
20