Maintenance And Cleaning - M Confort E1200 Manual De Usuario

Enfriador evaporativo
Ocultar thumbs Ver también para E1200:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MCONFORT E1200
21- Do not use the unit when the power cord is damaged. Send to service center for repair.
If the power cord is damaged, it must be replaced by a cord from the manufacturer or its
service agent.
22- Keep the unit out of the reach of children. Close supervision should be exercised when
children are around.
WARNING: Do not allow children to use the unit by themselves.
23- Keep the cable away from sharp or hot objects.
24- Clean the unit thoroughly before using it for the first me.
25- Do not clean the unit with metal elements. It may scratch the surface or cause an
electric shock.
26- Do not clean the unit with flammable liquid.
27- Avoid sharing a power outlet with other devices.
28- To disconnect, turn off the unit and then disconnect the plug.
29- Do not use new and old ba eries at the same me in the remote control.
30- Remove the ba eries from the remote control when not in use.
VIII. MAINTENANCE AND CLEANING.
NOTE: A er prolonged use, the filter screen becomes clogged with dust and dirt, which will greatly
affect the performance of the unit. It is recommended to clean the filter screen frequently.
- Cleaning of the filtra on mesh.
1- Remove the plug from the socket.
2- Take the filter mesh handle and pull upwards (fig. 4)
3- Clean the filter mesh with a mild detergent and a so brush.
4- Make sure the filter mesh is completely dry before installa on.
- Clean the water tank.
1- Remove the plug from the socket.
2- Take out the water tank (fig.5)
3- Clean the water tank with a li le mild detergent and then rinse with water.
4- Put the water tank in place a er cleaning.
17

Hide quick links:

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido