Introduction; Information About This Document; Purpose; Intended Use - sewerin HP 105 Manual De Instrucciones

1

Introduction

1.1

Information about this document

This document is a component part of the product.
● Read the document before putting the product into operation.
● Keep the document within easy reach.
● Pass this document on to any subsequent owners.
● Contradictory national legal regulations take precedence over
the information in this document.
Translations
Translations are produced to the best of our knowledge. The
original German version is authoritative.
Right of reproduction
No part of this document may be edited, duplicated or circulated
in any form without the express consent of Hermann Sewerin
GmbH.
1.2

Purpose

The HP 105 pressure regulator is intended for use with the POR-
TAFID M3-K detector.
The device requires a constant operating pressure of the sup-
plied fuel gas of 1.00 bar. The HP 105 pressure regulator permits
exact adjustment of the gas supply.
1.3

Intended use

The HP 105 pressure regulator is suitable for the following uses:
− professional
− industrial
− commercial
The product must only be used for the applications specified in
section 1.2.
10 │ English