Structure Of The Pressure Regulator; System Components - sewerin HP 105 Manual De Instrucciones

2

Structure of the pressure regulator

Note
The black cover cap (3) must not be removed.
3

System components

A fully-functioning system requires the following components:
− PORTAFID M3-K
− pressure regulator HP 105
− fuel gas bottle
− pressure hose K
The following tools are needed to assemble the system:
− SW13 open-end wrench
− 5 mm Allen key
12 │ English
1 Connection to fuel gas
bottle
2 Manometer
3 Cover cap
4 Connection to pres-
sure hose
5 Regulating screw with
nut