Lcd Indicators - Riello DIALOG VISION Manual De Instalacion Y Uso

S
YSTEM DESCRIPTION
LCD
INDICATORS
This chapter provides a detailed description of all the display indicators.
ICON
54
STATE
Steady on
Flashing
Steady on
The UPS is operating in battery mode. In this state it will beep at
Steady on
When operating in battery mode, the UPS signals that it is about
Flashing to switch off due to end of discharge. In this state it beeps at
Steady on
Steady on
Steady on
Represents the estimated percentage of battery charge
Active
Indicates the percentage of load applied to the UPS in relation
Active
Flashing
DESCRIPTION
Indicates a fault (see table 3)
The UPS is in stand-by mode
The UPS is operating in mains mode
regular 4-second intervals.
regular 1-second intervals.
Indicates that the battery is faulty
The AVR function is active
The Powershare socket is active
(see table 1)
to the nominal value
(see table 2)
The UPS is in an overload condition