Alto Professional SXM112A Tourmax Manual De Instrucciones página 15

SPECIFICATIONS
Total output power:
Max SPL @ 1m:
Frequency Response:
Low Frequency:
High Frequency:
Horn Coverage:
Input Level:
Input Impedance:
Connectors:
Cabinet:
Protections:
Dimensions (H x W x D):
Weight (monitor only):
Inrush current at initial switch-on: 2.93 A
Inrush current after power supply interruption: 4.98 A
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
400 W Continuous RMS (335 W LF + 65 W HF)
800 W Peak (670 W LF + 130 W HF)
118 dB Continuous, 121 dB Peak
Varies based on preset modeler setting
12" (305 mm) coax, 2" (51 mm) voice coil
1" (25 mm) neodymium driver; 1" (25mm) voice coil
70° H x 70° V spherical horn
Line + 4 dB
30 kΩ balanced, 15 kΩ unbalanced
Input: 1/4" TRS or XLR
Link: XLR
Trapezoidal, multi-layer plywood, black paint finish
Analog limiter; 16-preset modeler; line volume; clipping LED indicator;
ground switch
12.3" x 15.5" x 20.2" (313 mm x 393 mm x 513 mm)
26.1 lbs (11.9 kg)