Tools And Materials Required; Grounding The Refrigerator - Cafe CSB42 Manual Del Propietário

TOOLS AND MATERIALS
REQUIRED
• Tinsnips to cut banding
• Stepladder
• Tape measure
• Gloves
• 5-Gal. Bucket with cover
• Appliance hand truck
• Tubing cutter
• #2 Phillips screwdriver
• Drill and appropriate bits
• Safety glasses
• Pliers
Refrigerator Tubing kits
• Water shut-off valve
• Custom panels for doors and grille panel
• Screws to secure refrigerator to cabinetry
• Stick-on hook and loop fastener strips for
HARDWARE SUPPLIED
• Water filter bypass plug
• Toekick
FLOORING
For proper installation, this refrigerator must be
placed on a level surface of hard material that is
at the same height as the rest of the flooring. This
surface should be strong enough to support a fully
loaded refrigerator, or approximately 1,500 lbs.
(680.39 kg).
NOTE: Protect the finish of the flooring. Cut a large
section of the cardboard carton and place under
the refrigerator where you are working.
49-1000081 Rev. 1
Installation Instructions
™

GROUNDING THE REFRIGERATOR

WARNING
Electrical Shock Hazard.
Failure to follow these instructions can result in death,
fire, or electrical shock.
The power cord of this appliance is equipped
with a 3-prong (grounding) plug which mates
with a standard 3-prong (grounding) wall receptacle
this appliance.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
Where a standard 2-prong wall outlet is encountered, it
is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
PRONG FROM THE POWER
CORD.
APPLIANCE.
19