HAMPTON BAY LK-52PN Guía De Uso Y Mantenimiento página 4

Installation - Ceiling Fan Light Kit
1
Preparing the fan
□
Remove the ceiling fan switch cup cover (D) from the ceiling
fan assembly by removing the three mounting screws (FF).
□
Remove the center plug (GG) from the switch cup cover (D).
3
Wiring the light kit to the fan
□
Locate the blue and white wires inside the ceiling fan
switch cup (E) for light connection.
□
Connect the blue wire from the ceiling fan switch cup (E) to
the black wire from the light kit (A).
□
Connect the white wire from the ceiling fan switch cup (E)
to the white wire from the light kit (A) by connecting the
molded plugs together.
□
Reattach the switch cup cover (D) to the ceiling fan switch
cup (E) and secure with the screws (FF) that were removed
in step 1.
FF
D
GG
2
Preparing the light kit
□
Remove the lockwasher (HH) and hex nut (II) from the
threaded nipple of the light kit fitter assembly (A) and save
them for later use.
□
Insert the black wire and white wire from the light kit
through the center hole of the ceiling fan switch cup cover
(D).
□
Thread the ceiling fan switch cup cover (D) onto the
threaded nipple on the top of the light kit (A).
□
Insert the black wire and white wire through the lockwasher
(HH) and hex nut (II). Tighten them securely.
A
A
4
D
II
HH
E
FF
D
II
HH