Operation; Scan Modus - Dreve Drufosmart scan Instrucciones De Trabajo

8. Operation

Turn the unit on by means of the main
switch (43) at the back of the unit. By
this the scanner (1) and the display (2)
at the front of the unit will be activated.
An acoustic signal shows that the unit
is ready for operation; the display will
show the name of the machine Dru-
fosmart scan.

8.1 Scan modus

Every outer package of Dreve thermo-
forming blanks is labelled with a bar-
code label.
This barcode contains the encrypted
product name, material strength as
well as the individual heating and cool-
ing times.
In order to scan the material data with
the Drufosmart scan the barcode is to
be placed as centrally and evenly as
possible onto the scan field (1).
There will be an acoustic signal for
the confirmation of the data capture
and the display will show all neces-
sary data.
Info
The light emanating from the scan-
ner is harmless. Even in case of
direct eye contact it has no nega-
tive impact!
After 15 min. without use the
scanner turns off automatically. By
pressing the OK key it can be re-
activated again. During an active
thermoforming process the scan-
ner is deactivated. After termina-
tion of the process it will be re-
activated automatically.
33