Exceeding Of Entered Heating/Cooling Times; Entering A Wrong Barcode - Dreve Drufosmart scan Instrucciones De Trabajo

Drufosmart scan

9.6 Exceeding of entered heating/cooling times

After elapse of times adjusted regu-
larly (display position a/c) there will be
an acoustic signal. The exceeded time

9.7 Entering a wrong barcode

If a barcode is scanned that does not
correspond to the programming of the
Drufosmart scan, four acoustic warning
signals will be heard and the display will
show ERROR at position b.
40
will be blinking in the display as control
mechanism.
By scanning the correct barcode you
can proceed further, as described in
point 8.0.