Supplies Required - Bradley Halo S19214 Serie Manual De Instalación

S19214

Supplies Required:

• (3) ⁄ " floor anchors and bolts
3
8
• Teflon tape and pipe sealant
• 30 PSI (2 .0 bar) min/90 PSI (6 .1 bar) max flow pressure
• 125 PSI (8 .6 bar) max static pressure
• Piping to ½" NPT (BSPP) water supply inlet (30–90 psi [2 .0-6 .1 bar])
• Piping to 1¼" NPT drain outlet on unit (if included with unit)
• OPTIONAL: sign-mounting hardware
Local codes may require the installation of a backflow prevention valve to complete proper installation.
Compliance with local codes is the responsibility of the installer. Valve must be tested annually to verify that it
is functioning properly. Backflow prevention valves are not included with the fixture and may be supplied by the
contractor or purchased from Bradley Corporation.
4 4/9/2018
Bradley • 215-1685 Rev. P; ECN 18-05-015
Installation