L O A D I N G D I S C S A N D M E M O R Y D E V I C E S - Gemini CDMP-7000 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

l o a d i n g d i s c s a n d m e m o r y d e v i c e s

Once you have connected all your cables, you can turn
the CDMP-7000's POWER on by pressing the POWER (1)
button, pressing the button a second time will turn off the
unit.
s o u r c e s e l e c t
The SOURCE SELECT (20) allows you to choose the me-
dia from which you will play music:
cd
Pressing the CD source button allows you to play
music from the CD drives.
USB
Pressing the USB source button allows you to play
music from a USB device.
Sd
Pressing the SD source button allows you to play
music from a SD/SDHC card.
midi
Pressing the MIDI source button switches the unit
to MIDI mode with bi-directorial support. In this mode,
all controls (button pressings, pitch potentiometers
moving and wheel rotations) are registered on the unit
and transferred to PC via USB MIDI. This can be used in
conjunction with DJ software to contrhol the software's
parameters. (For more information, see page 9).
l o a d i n g / e j e c t i n g
d i s c s
The SLOT-IN CD-ROM (pictured below) is where the CD
is held during loading, unloading and playback, and holds
both 12 cm and 8cm CD's.
Pressing the EJECT (19) button will eject the disc from the
SLOT-IN CDROM. The disc will not eject in PLAY mode.
11
l o a d i n g / e j e c t i n g
u s b / s d d e v i c e s
USB
Insert the USB memory device into the USB input (E)
on the top of the CDMP-7000. Upon loading the device,
the LCD Touch Display will show the folders and tracks on
the USB memory device.
Sd
Insert the SD card into the SD card slot (F) on the
top of the CDMP-7000. Upon loading the device, the LCD
Touch Display will show the folders and tracks on the SD
memory device.
E
F
To eject the USB and SD card, change the SOURCE SE-
LECT (20) to another selection and remove the USB mem-
ory device or SD card. To eject the SD card, press the SD
card in. When it pops up, pull the SD card out vertically.
*NOTE: Before powering off the CDMP-7000, remove any
USB memory device or SD card to ensure that no corrup-
tion of data occurs.
b r o w s i n g t r a c k s /
f o l d e r s
The browsing display shows the playable files and folders
on the CD, USB memory device, or SD card.
Rotating the rotary ENCODER(17) allows search-
ing through the browser. This can also be done
via touching the screen in the browsing display
area.
To open a folder, highlight a folder and press in the EN-
CODER (17) to select. To load a track, highlight a track to
load and press the ENCODER(17) again.
To return to the previous folder, press the BACK
(18) button.
c d m p
-
.
7 0 0 0
m a n u a l
g e m i n i d j
c o m

Publicidad

Tabla de contenido
loading

Tabla de contenido