Transcend 365 minicpap Auto Guía Rápida página 24

Ocultar thumbs Ver también para 365 minicpap Auto:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Transcend 365 miniCPAP Auto
Caring for your 365 miniCPAP Auto™
The 365 miniCPAP Auto™ device is a maintenance-free device. However, it's important to
keep it clean to ensure maximum efficiency and durability. Cleaning cycle frequencies
identified below are checked against product service life.
Warning:
Unplug the 365 miniCPAP Auto™ before cleaning.
Do not submerge the 365 miniCPAP Auto™ or power supply in liquid.
Prevent water from entering any openings of the device.
Do not use harsh or abrasive cleaning agents to clean the device or any
components.
Do not attempt to sterilize the 365 miniCPAP Auto™.
Do not place cleaning materials, such as a cloth or liquid, into the device air inlet or
air outlet connector.
Cleaning the CPAP Unit
Follow these instructions to clean the exterior of the 365 miniCPAP Auto™.
Wipe the device with a dry, lint-free cotton cloth
Exterior cleaning of the device should be performed as follows:
Product
365 miniCPAP Auto™
Caring for the Humidifier Reservoir
Follow these instructions to care for the humidifier reservoir.
1. Rinse the reservoir with distilled water weekly.
2. Reattach the humidifier reservoir to the PAP device.
3. Press and hold the Up and Down buttons for three seconds to start Drying
Mode. This mode will last 30 minutes unless you interrupt it by pressing any
button. After the 30-minute drying cycle, the blower will turn off and the
device will automatically enter Standby Mode. Dry mode flushes your CPAP
device, tubing and mask of any residual moisture.
4. Refill the reservoir with water prior to next use.
TM
Quick Guide
Periodic Cleaning Cycle
Weekly
24
ENGLISH
Product Service Life
5-Year
Page 24

Publicidad

Tabla de contenido
loading

Tabla de contenido