Connecting Players (Line In Connection); Connecting Players (Turntable Connection) - Pioneer A-10AE Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Connecting players (LINE IN
connection)
a Analog Audio Cable
a
a
Connect a playback device with an analog audio cable.
8
Network Audio Player
CD
Connecting players (Turntable
connection)
a Analog Audio Cable
a
You can connect a turntable that has an MM-type cartridge
to the PHONO jack. Use an analog audio cable to connect a
turntable.
If the turntable has a ground wire, connect it to the SIGNAL
GND terminal. With some turntables, connecting the ground
wire may cause hum, in which case it should be
disconnected.
0 If the turntable has a built-in audio equalizer, connect it to
an LINE IN jack other than the PHONO jack. Also, if the
turntable uses an MC type cartridge, install an audio
equalizer compatible with the MC type cartridge between
the unit and the turntable, then connect to any LINE IN
jack other than the PHONO jack.
Preparations
Turntable

Publicidad

Tabla de contenido
loading

Tabla de contenido