Adjusting The Sound Quality And Balance - Pioneer A-10AE Manual De Instrucciones

Adjusting the sound quality and
balance
1
LOUDNESS
When the LOUDNESS function is on, the bass and treble
are emphasized to enable powerful playback audio even at
low volumes.
0 This cannot be set when DIRECT (p11) is on (default
value). Press DIRECT to turn the DIRECT indicator off
before operating. Note that the LOUDNESS setting
reverts to the previous setting when the DIRECT function
is turned off.
1. Press LOUDNESS on the main unit to switch on or off.
The LOUDNESS indicator lights when on.
BASS
0 This cannot be set when DIRECT (p11) is on (default
value). Press DIRECT to turn the DIRECT indicator off
before operating.
1. Turn the BASS -/+ controller to enhance or moderate the
bass.
TREBLE
0 This cannot be set when DIRECT (p11) is on (default
value). Press DIRECT to turn the DIRECT indicator off
before operating.
1. Turn the TREBLE -/+ controller to enhance or moderate
the treble.
BALANCE
1. Turn the BALANCE L/R controller on the main unit to
adjust the balance of the sounds output from the left and
right speakers.
12
Basic Operations