For Service: Dryer Hood Reinstallation; For Service: Faucet Connections - Bradley Advocate AV Serie Manual Del Usuario

Installation
Dryer Hood Base Reinstallation (for service)
Faucet Connections (for service)
Remove the #10 flat
head screw from the
A
underside of the faucet
body. Slide the faucet
spout cover forward and
up to remove.
Bradley • 215-1771 Rev. H; ECN 16-08-027
Secure the dryer hood base
B
to the basin with #10 screws
and washers.
Loosely secure the #10 x ¾"
A
screw and washer to the side
wall.
C
5/10/2017
Position the faucet spout
cover onto the faucet spout
body (lap style). Secure the
cover to the base with the
#10 flat head screw.
Connect the supply tube
B
to the faucet connector.
Feed the tube through
the basin access hole.
AV30
21