Sony STR-ZA3100ES Guia De Ayuda página 334

Information [3.2. INFORMATION]
Network Standby [3.3. NETWORK STANDBY]
ON, OFF
Music Connect [3.4. MUSIC CONNECT]
4. Audio Setup [4. AUDIO SETUP]
Digital Legato Linear [4.1. DIGITAL LEGATO LINEAR]
AUTO1, AUTO2, OFF
Sound Optimizer [4.2. SOUND OPTIMIZER]
NORMAL, LOW, OFF
Sound Field [4.3. SOUND FIELD]
2CH STEREO, DIRECT, A.F.D., DOLBY SUR, NEURAL:X, MULTI STEREO
In-Ceiling Speaker Mode [4.4. IN-CEILING SPEAKER MODE]
FRONT&CENTER, FRONT, OFF
Pure Direct [4.5. PURE DIRECT]
ON, OFF
Subwoofer Low Pass Filter [4.6. SUBWOOFER LOW PASS FILTER]
ON, OFF
Sincroniza el audio con la salida de video [4.7. A/V SYNC]
HDMI AUTO, 0 ms a 300 ms (intervalo de 10 ms)
Selección del idioma de la transmisión digital [4.8. DUAL MONO]
MAIN, SUB, MAIN/SUB
Dynamic Range Compressor [4.9. DYNAMIC RANGE COMPRESSOR]
AUTO, ON, OFF
Neural:X [4.10. NEURAL:X]
ON, OFF
Dialog Control [4.11. DIALOG CONTROL]
0 dB a 6 dB (intervalo de 1 dB)
IMAX Mode [4.12. IMAX MODE]
AUTO, ON, OFF
IMAX adjustment [4.13. IMAX ADJUSTMENT]
[4.13.1. HPF/CROSSOVER]
Para el STR-ZA3100ES/ZA2100ES: FRONT, CENTER, SURROUND, HEIGHT1 o HEIGHT2 / 40 Hz - 200 Hz
(intervalo de 10 Hz) para cada altavoz
Para el STR-ZA1100ES: FRONT, CENTER, SURROUND o HEIGHT / 40 Hz - 200 Hz (intervalo de 10 Hz) para
cada altavoz
[4.13.2. LPF FOR SUBWOOFER]
40 Hz - 200 Hz (intervalo de 10 Hz)
[4.13.3. SUBWOOFER VOLUME]
-10.0 dB a +10.0 dB (intervalo de 0,5 dB)
[4.13.4. REDIRECT TO SUBWOOFER]
ON, OFF
5. HDMI Setup [5. HDMI SETUP]
4K Scaling [5.1. 4K SCALING]
AUTO, OFF
Control for HDMI [5.2. CONTROL FOR HDMI]
ON, OFF
Standby Linked to TV [5.3. STANDBY LINKED TO TV]
ON, AUTO
Audio Return Channel [5.4. AUDIO RETURN CHANNEL]
EARC, ARC, OFF
Standby Through [5.5. STANDBY THROUGH]
AUTO, ON, OFF
HDMI Audio Out [5.6. AUDIO OUT]
AMP, TV+AMP
HDMI Zone2 Audio Out [5.7. ZONE2 AUDIO OUT]
AMP, ZONE2 TV+AMP, ZONE2 AMP
HDMI Subwoofer Level [5.8. SUBWOOFER LEVEL]
AUTO, +10 dB, 0 dB
334