Teka HGL-924 Guía De Uso página 27

3172833-000 15/01/15 10:48 Página 27
Electrical safety
• In order to connect the oven
to the mains, the technician
should use an HO5RR-F,
H05SS-F or H07RN-F power
cable.
diagram is shown in the
figure.
• The oven must always have
a good earth connection that complies with current
regulations.
• Connection must be made by means of an omnipolar
switch that is suitable for the current drawn and with a
minimum aperture between contacts of 3 mm for
disconnection in case of emergency, cleaning or bulb
changing. Under no circumstances must the earth wire
pass through this switch.
• This switch may be replaced by a plug, provided it is
accessible for normal use.
• Any handling or repair to the appliance, including
replacement of the power cable, should be carried out
by authorised Technical Service Personnel using
original spare parts. Repairs or handling by others may
damage the appliance or cause malfunctioning that
could be hazardous to your safety.
• Unplug your oven if it malfunctions.
• Ovens should only be fitted under those worktops
recommended by the manufacturer.
The connection
Figure
27