Specifications For The Sartolab P20 Plus - Sartorius Stedim Biotech Sartolab-P20 Instrucciones Para El Uso

4. Specifications for the Sartolab P20
Order numbers
Housing material
Filter material
Filter diameter
Filtration area
Hold-up volume before
bubble point
Connector: inlet
Connector: outlet
Flow direction
Housing burst pressure
Bubble point
Max. recommended
inlet pressure
Flow rate for water
Filtration range

5. Specifications for the Sartolab P20 Plus

Order numbers
Housing material
Filter material
Filter diameter
Filtration area
Hold-up volume before
bubble point
Connector: inlet
Connector: outlet
Flow direction
Housing burst pressure
Bubble point
Max. recommended inlet pressure 3 bar (43 psi)
Flow rate for water
Filtration range
* > 3.1 bar when measured with an automatic integrity tester
4 |
18052D, 18053D
Polycarbonate
Surfactant-free cellulose acetate 0.2 μm pore size
64 mm
2
20 cm
1 ml
Female luer lock or stepped hose nipple with 6–12 mm
outer diameter
Hose nipple (see above)
Unidirectional
> 5 bar (72 psi)
> 3.2 bar (46 psi)*
3 bar (43 psi)
300 ml/min at Δp = 1 bar (14.5 psi)
100 ml – max. 5 l
18056D, 18058D
Polycarbonate
Surfactant-free cellulose acetate, 0.2 μm pore size
Glass fiber, 100% free of binding agents
64 mm
2
20 cm
Approx. 1.5 ml
Female luer lock or stepped hose nipple with
6–12 mm outlet diameter
Hose nipple (see above)
Unidirectional
> 5 bar (72 psi)
> 3.2 bar (46 psi)*
300 ml/min at Δp = 1 bar (14.5 psi)
100 ml – max. 10 l