Worx Landroid M Serie Guia De Instalacion página 10

Your Landroid M needs to know where to mow. This is why you have to mark its working area with a boundary wire
®
that will form an invisible fence. This wire will also guide your Landroid
If your neighbor also uses a Landroid
Boundary Wire and your neighbor's.
1. Placing the Charging Base
First of all, find a spot for the charging base, taking into account the position of your outdoor socket since the charging base only has a
50ft power cord.
NOTE: Make sure the adaptor and the electrical socket are always kept in a dry area.
10
EN
M , then you must keep a space of at least 20 inches between your
®
1.1
The charging base should be placed along a straight line, with the
"IN" arrow pointing to the lawn. Allow 6ft distance with no obstacles
both front and back of the charging base. If possible, place the
charging base in the shade, and batteries are better recharged in a
cool place.
Make sure that your Landroid
obstacles.
1.2
Feed the boundary wire through the tunnel underneath the
charging base.
M to its charging base.
®
M can run on a flat area, clear of any
®