Sony HANDYCAM DCR-SX45 Guía De Operaciónes página 30


Connect your camcorder to a TV with the A/V connecting cable (,
supplied) or an A/V connecting cable with S VIDEO (, sold separately).
Connect your camcorder to the input jack of the TV.

Play back movies and photos on your camcorder (p. 26).
To set the aspect ratio according to the connected TV (16:9/4:3)
(MENU)  [Show others]  [OUTPUT SETTINGS] (under
Touch
SET] category)  [TV TYPE]  [16:9] or [4:3] 

Notes
When you connect your camcorder to a TV compatible with the ID-1/ID-2 system, set [TV TYPE] to

[16:9]. The TV switches to full mode automatically. Refer also to the instruction manuals supplied with
your TV.
When you set [TV TYPE] to [4:3], the image quality may deteriorate. Also, when the recorded image's

aspect ratio switches between 16:9 (wide) and 4:3, the image may jitter.
On some 4:3 TVs, the photos recorded in 4:3 aspect ratio may not be displayed full screen. This is not a

malfunction.
When you play back an image recorded in 16:9 (wide) aspect ratio on a 4:3 TV not compatible with the

16:9 (wide) signal, set [TV TYPE] to [4:3].
Tips

To check information (counter, etc.) on the screen of the monitor, touch

others]  [OUTPUT SETTINGS] (under
OUT/PANEL] 
US
0
[GENERAL SET] category)  [DISP OUTPUT]  [V-
 
.
[GENERAL
 
.
(MENU)  [Show