GENERAL INFO 5HP
Main setup data Grasso 5HP
Time interval between stopping
Time interval between starting
Time interval between capacity
Lubricating oil pressure diffe-
Oil discharge - running in - filter
Oil discharge - permanent - filter
Standard direction of rotation of
Cylinder numbering
Fig.1:
0089505esp_Pre-release_8
22.03.2017
Description
General limits of operation
Start frequency
and re-starting
and re-starting
steps
Oil level
rence
compressor drive shaft
S
2
4
Top view compressor (S=shaft end)
Value
Precaución
Refer to Product Information
Sección 4.1, Página 50
Refer to Product Information Sec-
ción 4.1, Página 50
max. 6 starts per hour
min. 2 minutes
min. 10 minutes
min. 3 minutes
25-75% crankcase sight glass
between 1.3 and 3.0 bar Setting
approx. 2.0 bar
Red coloured filter element
Grey filter element
Counterclockwise when facing shaft
end
1
3
3
6
Remark
For continuous minimum part-
-load (i.e. more than 30 minutes)
consult Grasso
Adjust the steps between up and
down loading, in such a way that
the system is running stable
After a mimimum of 15 minutes
running time at an oil tempera-
ture of approx. 35
Factory mounted; to be repla-
ced after max. 100 running
hours by permanent oil dis-
charge filter element
Supplied loose; replacement for
factory mounted running in filter
S
1
2
4
5
o
o
C (95
F)
7