Refco DIGIMON-SE Guía De Instalación Y Funcionamiento página 11

Instruction Manual DIGIMON-SE / DIGIMON4 English
Select pressure unit
SET +
R
Hold down the button. Use to select the desired unit. Release both
buttons.
Select temperature unit
SET -
R
Hold down the button. Use to choose between °C and °F. Release
both buttons.
Important note:
The device will save the last pressure and temperature units selected.
Memory function of the analogue pressure display:
SET LP/HP
Save value (current measurement value): press the and buttons at
the same time
LP/HP
Retrieve memory value: press the button for 3 seconds (display freezes)
LP/HP
Clear display: press the button for 3 seconds saved value is no longer
visible
SET LIGHT
Delete memory value: press the and buttons at the same time
Superheat/Subcool mode
9