Metra INST-6000 Instrucciones De Instalación página 25

Dodge Dakota
1987-1996
1. Remove (8) torx-head screws from the dash
trim bezel.
2. Remove (2) Phillips screws from the lower steering
column trim and remove.
3. Remove (1) Phillips screw from each side of the
steering column.
4. Unclip the dash trim bezel and remove. (Figure A)
5. Remove (2) Phillips screws securing the factory
radio and disconnect the wiring.
Dash Disassembly INST-6000
Dodge Dakota
1997-2000
1. Unclip the entire dash
trim bezel. (Figure A)
2. Remove (2) 3/8"
hex-head screws
securing the factory
radio and disconnect
the wiring.
Dodge Daytona
1990-1993
1. Pull out on the dash
trim bezel and remove.
(Figure A)
2. Remove (2) screws
from each side of the
lower console (this
will allow easier radio
removal).
3. Remove (2) screws
securing the factory
radio and disconnect
the wiring.
6.5
Dodge Durango
1997-2000
1. Unclip the entire dash
trim bezel. (Figure A)
2. Remove (2) 3/8"
hex-head screws
securing the factory
radio and disconnect
the wiring.
Dodge Neon/Plymouth
Neon 1994-1999
1. Remove the ashtray.
2. Unclip the radio trim
bezel and remove.
(Figure A)
3. Remove (2) 3/8"
hex-head screws
securing the factory
radio and disconnect
the wiring.