Din Radio Provision - Metra INST-6000 Instrucciones De Instalación

Kit Preparation 99-6000
Chrysler Sebring/Dodge
Avenger 1995-2000
Cut and remove all mounting tabs on the
the shaded tabs.
Continue to kit assembly, p. 1.2
Jeep Grand Cherokee
1993-1995
1. Cut and remove all mounting tabs on the
Radio Housing EXCEPT the shaded tabs.
2. Cut tab "A" along the scored line and remove
the bottom portion of the tab.
Continue to kit assembly, p. 1.2

DIN radio provision

1. Slide the DIN cage into the kit and secure
by bending the metal locking tabs down.
2. Slide the aftermarket radio into the cage
until secure. (Figure A)
3. Locate the factory wiring harness in the dash
Metra recommends using the proper mating
adapter from Metra or AXXESS Re-connect the
negative battery terminal and test the unit for
proper operation.
4. Reassemble dash in reverse order of disassembly.
(Figure B)
"A"
(Figure A)
1.2
Kit Assembly 99-6000
(Figure B)
99-6500
Section 2
Chrysler/Dodge/Eagle/
Ford/Jeep/Lincoln/Mercury/
Plymouth 1974-2003
99-6500
KIT FEATURES
• DIN radio provision
KIT COMPONENTS
• A) Radio housing
A
TOOLS REQUIRED
• Phillips screwdriver • Socket wrench • Cutting tool
2.0