Customer Service/Technical Support - Pioneer SP-SB03 Instrucciones Para El Uso

hOw tO OPtImIZE thE SOUND whEN
tV SPEAkErS ArE ON
you should hear sound from the bar. if you don't, turn
up the volume on the bar using its volume control but-
tons. if your bar is connected to your tv, there's a very
Dimensions
good chance your tv speakers are also playing. it's
impossible to give specific instructions on how to turn
off the speakers for every tv, but here's a way to do it
that covers many of the tvs out there.
1. on your tv remote control, find a "menu"
Frequency Range
or "setup" button.
2. press this button. you should see an
Drivers: Woofer
on-screen menu.
3. next, look for an option to control audio
Drivers: Midrange
functions and select it.
Drivers: Tweeter
the setting to turn off your tv's internal speakers should
be here. if you can't turn off your tv internal speakers,
Power Output
don't worry. to enjoy the best performance from your
bar, you'll want it to play louder than your tv.
Voltage Inputs
dimensions
Power Consumption (Standby)
Power Consumption (Main Power Switch Off )
Complies with California Code of Regulations, CCR 93120.2(a) Phase 2.
Frequency Range
Specifications and designed subject to modification without notice.
drivers: Mid-Woofer
PIONEER, the Pioneer logo, and the A. JONES logo are registered trademarks of Pioneer Corporation.
drivers: tweeter
Bluetooth is a registered trademark of Bluetooth SIG, Inc. Bluetooth functionality requires a compatible A2DP profile Bluetooth-
enables device. Certain Bluetooth features may not be supported by all compatible Bluetooth-enabled devices, and/or the
power output
functionality of such features may be limited in certain devices.
voltage inputs
power consumption
power consumption (standby)
power consumption (Main power switch off)
dimensions
voltage input
power output
power consumption
power consumption (standby)
Cabinet
Finish
Inputs
Bluetooth
®
cabinet
Finish
inputs
Bluetooth
®
cabinet
Finish
driver
use the following steps to adjust the volume balance
between your tv and the bar:
1. if necessary, program your bar to respond to the
SPECIFICATIONS
volume up and down control commands of your
tv remote.
2. turn your tv volume all the way down using the
control buttons on your tv.
3. then, using the volume keys on your speaker
bar set the volume to a normal listening level
(do not use the remote control). after you make
these adjustments, your speaker bar should
always be louder than your tv speakers.
then use the tv remote control to adjust the
volume as you normally do.

CUStOmEr SErVICE/tEChNICAl SUPPOrt:

For assistance with basic set up, operation,
or troubleshooting, you may contact our
6 x 28 Watts (1kHz 1% THD @ 4 Ohms)
customer service hotline at:
1 (800) 421-1404
Hours: Monday-Friday10:30 am-7:00 pm est
speakeR BaR
6 x 28 Watts (1kHz 1% tHd @ 4 ohms)
toslink optical x 1, analog x 1
2 Watts power off/4 Watts auto power off
suBWooFeR
50 Watts (50Hz 1% tHd @ 6 ohms)
28" W x 4.8" H x 16" D
CARB2 MDF Wood
Black Ash Vinyl
58Hz - 20kHz
4" x 2 (Bottom mount)
3" x 2 (1 Per Side)
1" x 2 (1 Per Side)
Toslink Optical x 1, Analog x 1
A2DP Wireless 2.4 gHz
100v - 240v
35.98" W x 4.05" H x 4.74" d
0.5 Watts
caRB2 MdF Wood
0 Watts
Black ash vinyl
45Hz - 20kHz
3" x 4 (2 per side)
1" x 2 (1 per side)
a2dp Wireless 2.4 gHz
100v - 240v
60 Watts
0 Watts
9.01" W x 10.01" H x 9.01" d
caRB2 MdF Wood
Black ash vinyl
6.5" Woofer
100v-240v
60 Watts
1 Watt
11
English