Usingtheappliance
•
Use with tap water or lukewarm water.
•
Do not turn the switch to ON before placing the nozzle in your
mouth.
1
1
Openthewatersupply
cap.
2
2
Pulloutthewhitepart
ofmainunituptothe
usageline( mark).
•
It may be hard to pull out
the main unit with the water
supply cap closed.
•
Water pressure will not rise
unless the main unit is
pulled out to the usage line.
•
Be careful since the nozzle
might pop out from the
storage compartment at
this time.
3
3
Insertthenozzleinto
thenozzlesocket
holdingontothewhite
partofthemainunit.
•
Insert it securely until it clicks.
4
4
Pourinwater.
•
Always use fresh tap water.
•
If the water feels cold, use lukewarm water of up to 0 °C
(10 °F).
•
Do not pour in salt, toothpaste, or chemicals.
•
To continuously use, make sure the switch is set to OFF.
5
5
Closethewatersupplycap.
•
Securely close after pouring in water.
3
2
1
5
4