Rockford Fosgate Pro serie Manual De Instrucciones De Instalación Y Operación página 9

2-Channel Wiring – Model 500XP
• RCA OR High Level Inputs
connect to Front
• Signal Imput Switch set to 2
• Gain - front and rear set
equally
• Crossover - front and rear set
identically (example; switch to
LP and frequency at 60Hz)
3-Channel Wiring – Model 500XP
• RCA OR High Level Inputs connect to
Front or Front and Rear
• Signal Imput Switch set to 2 or 4
NOTE: Reverse polarity on subwoofer if
front channel is set to HP (High
Pass) and rear channel is set to LP
(Low Pass)
CAUTION: Use only one input configuration. Using both the RCA and High Level
!
inputs will cause undesirable operation.
I
NSTALLATION
9