Tabla de contenido
Publicidad
The instrument circuit contains static sensitive devices, and care must be
taken in handling the printed circuit board. If the protection of an instrument
has been impaired it should not be used, and be sent for repair by suitably
trained and qualified personnel. The protection is likely to be impaired if, for
example, the instrument shows visible damage, fails to perform the
intended measurements, has been subjected to prolonged storage under
unfavourable conditions, or has been exposed to severe transport
stresses.
New Instruments are Guaranteed for 3 Years from the Date of
Note: Any unauthorized prior repair or adjustment will automatically invalidate
Instrument Repair and Spare Parts
For service requirements for Megger Instruments contact :-
Megger Limited
Archcliffe Road
Dover
Kent, CT17 9EN
England
Tel: +44 (0) 1304 502243
Fax: +44 (0) 1304 207342
or an approved repair company.
Returning an Instrument for Repair
If returning an instrument to the manufacturer for repair, it should be sent
freight pre-paid to the appropriate address. A copy of the Invoice and of the
packing note should be sent simultaneously by airmail to expedite
clearance through Customs. A repair estimate showing freight return and
other charges will be submitted to the sender, if required, before work on
the instrument commences.
Megger Limited
Archcliffe Road
Dover
Kent CT17 9EN
England
4271 Bronze Way
Dallas
TX 75237-1017
U.S.A.
POBox 9007
Valley Forge
PA 19484-9007
U.S.A.
Megger SARL
29 Allée de Villemomble
93340 Le Raincy
Paris
France
This instrument is manufactured in the United Kingdom
The company reserves the right to change the specification or design without prior notice
Megger is a registered trademark
Part No. 6172-087 - Edition 9 - Printed in England - 09HH
REPAIR AND WARRANTY
Purchase by the User.
the Wa r r a n t y.
or
Tel: +44 (0) 1304 502100
Fax: +44 (0) 1304 207342
Tel: +1 (800) 723-2861 (U.S.A. only)
Tel: +1 (214) 330-3203 (International)
Fax: +1 (214) 337-3038
Tel: +1 (610) 676-8500
Fax: +1 (610) 676-8610
Tel: +33 (1) 43.02.37.54
Fax: +33 (1) 43.02.16.24
Megger Inc.
Valley Forge Corporate Center
2 621 Van Buren Avenue
Norristown, PA 19403
U.S.A.
Tel: +1 (610) 676-8579
Fax: +1 (610) 676-8625
Publicidad
Tabla de contenido
