MAINTENANCE
Testing for Leaks
Check that all connections are right. A small leak in any of the hoses or pipe connections will substantially reduce the
performance of your air compressor. If you suspect a leak, spray a small amount of soapy water with spray bottle. If
bubbles appear, repair or replace the faulty component. Do not over tighten any connections.
Storage
Before storing the compressor for a prolonged period, use an air blow gun to clean all dust and debris from the STORAGE
compressor. Disconnect the power cord and coil it up. Pull the pressure relief valve to release all pressure from the tank.
Cover the entire unit to protect it from moisture and dust.
Servicing
Perform the following maintenance at the intervals indicated below:
• Operate the pressure relief valve: Daily
• Drain air from tank daily
NOTE!
16