Ford FCE6150QV Manual Del Operador página 6

Risk Of Eye Or Head Injury
What could happen:
• Air powered equipment and power tools are capable of propelling materials such as fasteners, metal chips, saw dust,
and other debris at high speed which could result in serious eye injury.
• Compressed air can be hazardous. The air stream can cause injury to soft tissue areas such as eyes, ears, etc.
particles or objects propelled by the stream can cause injury.
• Tool attachments can be become loose or break and fly apart, propelling particles at the operator and others in the
work area.
How to prevent it:
• Always wear ANSI approved Z87.1 safety glasses with side shields.
• Never leave operating tool unattended. Disconnect air hose when tool is not in use.
• For additional protection, use an approved face shield in addition to safety glasses.
• Make sure that any attachments are securely assembled.
• Never point any nozzle or sprayer toward a person or any part of the body.
• Equipment can cause seriouss injury if the spray penetrates the skin.
Risk Of Fire Or Explosion
What could happen:
• Abrasive tools such as sanders and grinders; rotating tools such as drills and impact tools such as nailers, staples,
wrenches, hammers and reciprocating saws are capable of generating sparks which could result in ignition of flammable
materials.
• It is normal for the compressor motor and pressure switch to produce sparks while operating. If sparks come into
contract with vapors from gasoline or other solvents, they may ignite, causing a fire or explosion.
• Exceeding the maximum pressure rating of tools or accessories could cause an explosion resulting in serious injury.
How to prevent it:
• Never operate tools near flammable substances such as gasoline, cleaning solvents, etc.
• Work in a clean, well-ventilated area free of combustible materials.
• Never use oxygen, carbon dioxide or other bottled gases as a power source for air tools.
• Use compressed air regulated to maximum pressure at or below the rated pressure of any attachments.
• Never connect to an air source that is capable of exceeding 90 psi.
• Always verify prior to using the tool that the air source has been adjusted to the rated air pressure range.
• Never spray flammable liquids in a confined area. Do not spray where sparks or flames are present.
• Do not smoke while spraying.
• Keep compressor as far from spray area as possible.
SAFETY RULES
6