Cleaning Condenser Coil - Federal TSSM2454SC-3 Instrucciones De Instalación Y Operación

Cleaning Condenser Coil

Despite the presence of the filter, it is also necessary to check and clean the condenser
coil every 6 months or as necessary. FAILURE TO CLEAN THE CONDENSER COIL
WILL VOID THE COMPRESSOR WARRANTY. The condenser coil is cleaned as
follows:
1. Remove the top front shroud, lift up approximately 1" to disengage mounting pins.
2. Remove the condenser filter and clean it as outlined above in Cleaning Condenser
Filter.
3. Vacuum the front surface of the condenser coil, moving the vacuum nozzle
vertically. NOTE: Be careful not to bend or otherwise damage the condenser
coil fins. Moving the vacuum nozzle horizontally will cause the fins to bend.
Bent coil fins will affect condensing unit performance.
4. Reinstall the filter.
CONDENSER COIL
LED INDICATOR LIGHT
CLEAN CONDENSER FILTER
REMOVABLE CONDENSER
AIR FILTER
Cleaning Case Interior
1. The case interior should be wiped down daily and thoroughly cleaned on a weekly
basis. Refer to the "Daily Cleaning" and "Weekly Cleaning" sections in the
"CLEANING INSTRUCTIONS" chapter of this manual.
Refrigerated Self-Serve Merchandiser (High Profile)
REMOVABLE FRONT PANEL
Page 14