Acoustic Guitar; Flute; Clarinet; Tenor Saxophone / Soprano Saxophone - Harman AKG C214 Modo De Empleo

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USINg THE MIcRoPHoNE

Acoustic Guitar

4.5.5 Acoustic Guitar
Figure 7: Miking an acoustic guitar with a single C214
Place the microphone 20 to 40 in. (0.5 to 1 m) away from the guitar and aim it obliquely at
a point between the sound hole and neck.
Using two microphones gives you even better control of the sound.
Point a C214 at the sound hole from a distance of one to two feet (30 to 60 cm).
Place a small diaphragm microphone (e.g., a C451 B) 20 to 40 in. (0.5 to 1 m) away from
the guitar and align it with a point between the sound hole and neck.

Flute

4.5.6 Flute
Figure 8: Miking the flute with a single microphone
We recommend using two microphones.
Direct Microphone 1 toward the player's mouth at an angle from above (little breath
noise), and Microphone 2 at the instrument from the side.
36
If you prefer to use a single microphone,
place the microphone as mic 1 above at a distance of about 7 to 8 1/2 ft. (2 to 2.5 m)
above the floor.

4.5.7 Clarinet

Figure 9: Clarinet
Point the microphone at the lowest key. To minimize key noise, place the microphone a
little ways to the side of the instrument.

4.5.8 Tenor Saxophone / Soprano Saxophone

Figure 10: Tenor Saxophone
Aim the microphone at the middle of the instrument from a distance of about 2 to 3 1/2 ft.
(50 cm to 1 m).
C214 MANUAL
C214 MANUAL
USINg THE MIcRoPHoNE
Tenor Saxophone /
Soprano Saxophone
Figure 11: Soprano Saxophone
Clarinet
37

Publicidad

Tabla de contenido
loading

Tabla de contenido