Getting Acquainted - Kenwood NEXEBGE NX-740H Manual De Instrucciones

FRONT/ REAR PANEL
(Power) switch
Press to switch the transceiver ON or OFF.
/ keys
Press to activate their programmable functions {page 6}.
Display
Refer to page 4.
/ keys
Press to activate their programmable functions {page 6}.
TX/RX Indicator
Lights red while transmitting. Lights green while receiving a signal. Flashes
orange when receiving an optional signaling call.
Microphone jack
Insert the microphone plug into this jack.
Status Indicator
Lights during a specifi ed mode, based on dealer programming.
(Such as AUX, External Speaker, Horn Alert, Lone Worker, Priority Zone-Channel
Select, Public Address, Scan Delete/Add, Scrambler/Encryption and Talk Around.)
S / A / <B / C> /
Press to activate their programmable functions {page 6}.
Speaker
Internal speaker.
PTT switch
Press this switch, then speak into the microphone to call a station.
Antenna connector
Connect the antenna to this connector.
ACC connector
Connect the ACC to this connector, via the KCT-60.
External speaker jack
Connect an external speaker to this jack.
Power input connector
Connect the DC Power Cable to this connector.

GETTING ACQUAINTED

keys
ACC.
3