Sammic SL-650C Manual De Instrucciones página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
washed under a direct water jet; instead you
can use a wet cloth and any ordinary detergent.
·DO NOT USE any abrasive detergent (etchant,
concentrated lye, etc.) nor any scourer or
scraper containing normal steel that will cause
rust to develop on the machine.
OTHER IMPORTANT REMARKS
· This machine is not designed to be used by
individuals (including children) with reduced
physical, sensorial or mental facilities, or who
lack the relevant experience or knowledge,
unless they are supervised by or have
received instruction on how to use the
apparatus from a person responsible for their
safety.
· Before cleaning, servicing or repairing the
machine, it is necessary to unplug it from the
mains.
· When the appliance is going to be inactive for
a long period of time or at night, the door
should be kept open for aeration and avoiding
nasty smell.
· In case of a drain pump failure:
1.Drain the wash tank into a container until
the water level drops below the drain plug.
2.With the drain plug in place, remove the
front bottom panel and change the pump
(this can be done without moving the
machine). In order to drain the dishwasher
manually, connect a drain hose to the
collector. On pulling out the drain plug,
water flows out of the tank by gravity.
· In the event the power supply cable should get
damaged and have to be replaced, the repair
may only be done by a SAMMIC approved
assistance service.
· Airborne noise: the emission noise level
measured on a typical machine is 71 dB(A) at
a distance of 1m.
9
ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido