operAting the Device
LOCKED
Lock rotary knob
Unlock rotary
knob
DMM8 MANUAL
Step
Description
1
Press the rotary knob of the required input
•
8.11
Activate/deactivate LOCKED
The following elements can be locked using the LOCKED function:
SYSTEM CONTROL rotary knob
•
•
Complete unit
•
Individual channels
8.11.1 Locking the SYSTEM CONTROL rotary knob
To lock the SYSTEM CONTROL rotary knob, proceed as follows:
Step
Description
Press the SYSTEM CONTROL rotary knob for longer than
1
3 seconds
•
•
•
8.11.2 Unlocking the SYSTEM CONTROL rotary knob
To unlock the SYSTEM CONTROL rotary knob, proceed as follows:
Step
Description
Press the SYSTEM CONTROL rotary knob for longer than
1
3 seconds
•
•
•
ROUTING TO OUT is deactivated for the corresponding
input.
The LOCKED LED is lit.
Turning the rotary knob has no function.
All other rotary knobs are in LEVEL mode and can still be
operated.
The rotary knob lock is removed.
The LOCKED LED is no longer lit.
The rotary knob is in the basic LEVEL position.
122