Resetting The Factory Settings - AKG Acoustics DMM8 U Modo De Empleo

operAting the Device
Reset to factory
settings
DMM8 MANUAL
8
ON PEAK
IN 1
Figure 56: Complete copy process
8.13

Resetting the factory settings

To reset the factory settings for the entire device, proceed as follows:
Step Description
1 Switch on the device
Wait until the start sequence of the automixer is complete
(approx. 15 seconds).
Press the SYSTEM CONTROL rotary knob and keep pressed
2
until step 5
3 Switch off the device at the mains
4 Switch the device back on after a short waiting time
Wait until the start sequence of the automixer is complete
(approx. 15 seconds).
Release the SYSTEM CONTROL rotary knob
5
•
8 8
ON PEAK ON PEAK
IN 2 IN 3
The device's factory settings have now been restored and
a new system configuration can now be set up.
8 8
ON PEAK ON PEAK
IN 4 IN 5
8
ON PEAK
IN 6
127