Operating Mode / System Control; Control For Stereo Outputs; Modulation Display For Stereo Outputs; Stereo Headphone Output - AKG Acoustics DMM8 U Modo De Empleo

Description
SYSTEM
CONTROL
Rotary knobs for
outputs
Modulation
display
Headphone
output
DMM8 MANUAL
The input sensitivity is modified using the gain regulator on the rear of the
connected equipment.
5.3.2

Operating mode / SYSTEM CONTROL

The DMM8 U (UL, ULD) has numerous functions such as volume, tre-
bles, bass, auto-mixer functions etc. These functions are selected on the
SYSTEM CONTROL (7).
5.3.3

Control for stereo outputs

The control for the stereo outputs are labeled OUT (8). This control is used
to change the following parameters on the output channel:
• Volume
• Treble range
• Bass range
• Limitation response
• Balance and delay
5.3.4

Modulation display for stereo outputs

The modulation display (9) under the control for the stereo output channels
shows the output level in dB.
5.3.5

Stereo headphone output

Both inputs and outputs can be picked up on the stereo headphone out-
put (10).
78