Connect To The Mains Power Supply - AKG Acoustics DMM8 U Modo De Empleo

instALLAtion AnD connection
DMM8 MANUAL
Connect the microphones and accessories to the rear of the
DMM8 U (UL, ULD) as follows:
Step Description
1 Connect microphones and other signal sources (e.g. receivers
for wireless microphones) to the IN inputs
Connect outputs OUT L and OUT R to a mixing desk or am-
2
plifier
Connect the RCA jacks on the stereo recording output REC
3
(OUT) to a recording device
6.4

Connect to the mains power supply

Caution: Risk of damage
Do not connect the unit to the power network until you have established all
the audio connections!
Ensure that the input voltage on the DMM8 U (UL, ULD) corresponds to the
mains voltage.
To connect the device to the mains, proceed as follows:
Step Description
1 Connect the mains power supply cable to the appropriate
socket on the rear panel of the DMM8 U (UL, ULD)
2 Plug the power supply cable into a mains socket
89