Aiwa NSX-D9 Manual De Instrucciones página 16

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To play the programmed tracka repeatedly
Up to 30 tracks can be programmed
from any of the inserted
After
programming
the tracks,
press
RANDOM/REPEAT
disc.
repeatedly until C& appears on the display.
1
2,3
2
5
44,-
Use the remote control.
1 Press PRGM twice in stop mode.
PRGM
2
3
When PRGM is pressed once in step 1, the unit enters
KARAOKE PROGRAM (page 24).
Press DISC DIRECT PLAY, then press one of the
numbered buttons 1-5 within 3 seconds to select
a disc.
Go
to the next step when the tray stops rotating.
Press
the numbered
buttons
O-9 and +10 to
m
During programmed play, you cannot perform random play,
check the remaining time, and select a disc or track. "Can't
USE' is displayed if you attempt to select a track or random
play.
"FULL" is displayed if you attempt to program more than 30
tracks.
program a track.
Example:
To select the 25th track,
To select the 10th track,
Selected
track number
Program number
4 Repeat steps 2 and
press +10, +10 and 5.
press +1 O and O.
0
Total number of
selected tracks
Total playing time of
the selected tracks
3
to program other tracks.
5
Press +>
to start play.
To check the program
Each time -
or -
is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press
CLEAR in stop mode.
To
add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
15
ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido